TPE/TPR / TPE-S for ABS/PC overmolding
32N75
The 32N / 32K series is used for overmolding ABS, PC and PC/ABS resins in tools, household appliances, automotive components and stationery.
Material data
The 32N series is opaque; the 32K series is transparent.
Typical properties
| Test Items | Test Method | 32N75 |
|---|---|---|
| Hardness, Shore (A) | ASTM D2240 | 75A |
| Density (g/cm³) | ASTM D792 | 1.21 |
| Tensile Strength (MPa) | ASTM D412 | 18 |
| Elongation (%) | ASTM D412 | 450 |
| Compression Set 23℃/22h (%) | ASTM D395 | 20 |
| Compression Set 70℃/22h (%) | ASTM D395 | — |
The data shown are typical values, not guaranteed specifications. Actual properties may vary with processing conditions. Contact us to discuss material selection and application requirements.