TPV / TPV extrusion and injection molding
91N95
The 91N extrusion and 92N injection-molding series serve automotive, construction, electrical injection-molded components, and wire and cable applications.
Material data
Typical properties
| Test Items | Test Method | 91N95 |
|---|---|---|
| Hardness, Shore (A) | ASTM D2240 | 91 |
| Density (g/cm³) | ASTM D792 | 0.98 |
| MFR,230℃,5kg(g/10min) | ASTM D412 | 7 |
| Tensile Strength (MPa) | ASTM D412 | 10 |
| Elongation (%) | ASTM D412 | 550 |
| Tear Strength (kN/m) | ASTM D624 | 50 |
| Compression Set 70℃/22h (%) | ASTM D395 | 55 |
| Brittle point (℃) | ASTM D746 | -50 |
| Processing temperature (℃) | — | 180-220 |
The data shown are typical values, not guaranteed specifications. Actual properties may vary with processing conditions. Contact us to discuss material selection and application requirements.