Flame-retardant TPE / TPE-S flame retardant
12R50-118
Flame-retardant TPE for extrusion (11R) and injection molding (12R), including cable jackets and insulation.
Material data
Grade overview
| Test Items | 12R50-118 |
|---|---|
| Hardness (Shore A / D) | 54A |
| Density (g/cm³) | 1.05 |
| MFR 190℃/5kg (g/10min) | 0.1 |
Other grade properties
| Test Items | Test Method | 12R50-118 |
|---|---|---|
| Hardness (Shore A / D) | ASTM D2240 | 54A |
| Density (g/cm³) | ASTM D792 | 1.05 |
| MFR 190℃/5kg (g/10min) | ASTM D1238 | 0.1 |
| Thermal Deformation 150℃/4h (%) | GB/T 2951.31 | — |
| Brittle point (℃) | GB/T 5470-2008 | — |
| Tear Strength (kN/m) | GB/T 529 | 25 |
| Tensile Strength (MPa) | GB/T 1040-2006 | 9.5 |
| Elongation (%) | GB/T 1040-2006 | 543 |
The data shown are typical values, not guaranteed specifications. Actual properties may vary with processing conditions. Contact us to discuss material selection and application requirements.